Since there are many different sizes, styles, and types of architecture that we habitat, I can only tell you where, within your home, is the best place to install a thermostat that will then properly regulate the temperature, and maybe save you a whole lot of money.

First of all, the equipment that produces heat and/or cools your home must be in complete harmony with the thermostat that measures the indoor temperature. So too, that thermostat activates the heating or cooling equipment until the desired temperature within the area where your thermostat is located is achieved. As a result, the temperature within your dining room could be several degrees higher or less than the temperature within your bedroom or any other room in your home.

Do you have multi-zone temperature regulation for your home? If not, you have only one thermostat, so you must regulate the amount of heat or cold that is sent to or produced within each room in order to properly balance the temperature within the entire space of your home. That can be accomplished by increasing or reducing the amount of hot or cold air that enters each room. For a hot water system, you must reduce or increase the flow of hot water that flows through the radiators within your home.

The truth is, the rooms next to the exterior walls of your home usually cool faster or warm faster than any of the interior rooms of your home. As an example, during the winter it can be 20 degrees outside and, in spite of the best insulation available, that cold will be transmitted to the interior room directly behind that wall. That is known as an exterior wall. All of the other walls within your home are known as interior walls.

If you haven’t already guessed, your thermostat should be mounted on an interior wall that will be as far away from an exterior wall as possible. That being, the only influence that will cause your thermostat to activate your heating and/or cooling equipment will mainly be determined by the current air temperature, rather than the temperature of the wall.

With the above in mind, if your utility bill is higher than expected after doing all of the above you must seek the services of a professional who might discover the problem that you didn’t discover. So too, I sincerely hope that your efforts prove to be successful.

Article by Joseph Malek. For more articles by this author, visit Helium.

All dryers spin clothes around and blow hot air on them. How to select a dryer depends on your needs. The details are what drive the choice of a machine.

Energy source: Whether you choose a gas dryer or an electric one will be based largely on what kind of hookup is available at the new dryer’s location. Gas appliances usually cost slightly more initially, but tend to be more energy- efficient. A leading consumer affairs magazine estimates that a gas dryer costs 30 cents less per load to operate.

Capacity: Since manufacturers define capacity differently, one “extra large” dryer might not be the same as another.When choosing what dryer to buy, compare capacity using the cubic foot measurement. If your space is limited, stackable washer-dryer units are available.

Coordinate the capacity of your dryer with that of your washer. You’ll defeat the purpose of increased efficiency if you have a super-sized dryer but a washer that can only supply a half-capacity load (or vice-versa). The general rule is to have about twice as much capacity in the dryer than in the washer. So if you buy a 3.3 or 3.5 cu. ft. washer, you will need a 7 cu. ft. dryer. (You need more dryer space because the clothes need room to flop around.)

When in doubt, err on the side of larger when choosing a dryer. More dryer capacity will allow the clothes to dry more quickly, which saves money on your energy bill and is better for the environment. Like most large appliances today, a dryer will last for years. Plan for the future and consider possible changes in your family size when buying a dryer.

Controls: As with washers, controls on dryers have become more sophisticated, yet easier to use. Digital displays and one-touch selection can be programmed and preset to meet your drying needs. For a simpler operation, choose dial or push-button controls.

Temperature settings: Different fabrics require different drying times and temperatures. Your clothes will look newer longer, plus have fewer wrinkles, if they are dried using the correct settings. At a minimum, most machines offer “cotton” and “permanent press” settings, with “more dry” and “less dry” options. Choose a dryer with settings that meet your needs. A cool-down cycle will keep the drum spinning for a certain amount of time after the clothes are dry in order to prevent wrinkling.

Noise level: Choose a quiet machine if your dryer will be in or near a living area. Some newer models have additional insulation and reinforced frames to reduce operating noise.

Moisture sensors: While older dryers use thermostats or timers, newer models have moisture sensors that stop the cycle when the humidity in the drum falls below a certain level. This prevents over-drying and extends the life of your garments. This feature can also make ironing easier and save energy.

Drying rack: This feature allows you to dry heavier or bulkier items — such as canvas shoes — without tumbling.

Drum light: Socks and other small items can “disappear” in the back of the machine. A drum light makes it easier to find them.

Lint filter: Higher-end models have sensors that warn you when the lint filter is blocked. Whichever model you choose, make sure to vent the dryer properly and clean the lint filter regularly to avoid a risk of fire.

Information courtesy of Lowe’s.